Huawei Quidway S9300

Routing Tables: Public
Destinations : 10 Routes : 10
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.1.0/24 BGP 255 0 D 10.2.1.2 Vlanif40
10.2.1.0/24 Direct 0 0 D 10.2.1.1 Vlanif40
10.2.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.2.1.2/32 Direct 0 0 D 10.2.1.2 Vlanif40
100.1.1.1/24 BGP 255 0 D 10.2.1.2 Vlanif40
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
200.1.1.0/24 Direct 0 0 D 127.0.0.1 Vlanif60
200.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
After BGP ASN substitution is configured on PE1, the GE interfaces of CE1 and CE2 can ping
each other.
[CE1] ping -a 100.1.1.1 200.1.1.1
PING 200.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 200.1.1.1: bytes=56 Sequence=1 ttl=253 time=109 ms
Reply from 200.1.1.1: bytes=56 Sequence=2 ttl=253 time=67 ms
Reply from 200.1.1.1: bytes=56 Sequence=3 ttl=253 time=66 ms
Reply from 200.1.1.1: bytes=56 Sequence=4 ttl=253 time=85 ms
Reply from 200.1.1.1: bytes=56 Sequence=5 ttl=253 time=70 ms
--- 200.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 66/79/109 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10 50
#
interface Vanif10
ip address 10.1.1.1 255.255.255.0
#
interface Vlanif50
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
bgp 600
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
import-route direct
peer 10.1.1.2 enable
#
return
l Configuration file of PE1
#
sysname PE1
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-83