EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE2-GigabitEthernet2/0/0] quit
[PE2] interface loopback 1
[PE2-LoopBack1] ip address 3.3.3.9 32
[PE2-LoopBack1] quit
[PE2] mpls lsr-id 3.3.3.9
[PE2] mpls
[PE2-mpls] lsp-trigger all
[PE2-mpls] quit
[PE2] mpls ldp
[PE2-mpls-ldp] quit
[PE2] interface vlanif 40
[PE2-Vlanif40] ip address 40.1.1.2 24
[PE2-Vlanif40] mpls
[PE2-Vlanif40] mpls ldp
[PE2-Vlanif40] quit
[PE2] ospf
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] network 40.1.1.0 0.0.0.255
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
[PE2] bgp 100
[PE2-bgp] peer 1.1.1.9 as-number 100
[PE2-bgp] peer 1.1.1.9 connect-interface loopback 1
[PE2-bgp] ipv4-family vpnv4
[PE2-bgp-af-vpnv4] peer 1.1.1.9 enable
[PE2-bgp-af-vpnv4] quit
[PE2-bgp] quit
After the configuration, PE1 and PE2 can learn the loopback route of each other. The MP-IBGP
adjacency is set up between PE1 and PE2.
Step 3 Configure links between PE and CE. That is, running OSPF between PE and CE.
# Configure PE1.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 100:1
[PE1-vpn-instance-vpn1] vpn-target 1:1
[PE1-vpn-instance-vpn1] quit
[PE1] interface vlanif 50
[PE1-Vlanif50] ip binding vpn-instance vpn1
[PE1-Vlanif50] ip address 100.1.1.2 24
[PE1-Vlanif50] quit
[PE1] ospf 100 vpn-instance vpn1
[PE1-ospf-100] domain-id 10
[PE1-ospf-100] import-route bgp
[PE1-ospf-100] area 0
[PE1-ospf-100-area-0.0.0.0] network 100.1.1.0 0.0.0.255
[PE1-ospf-100-area-0.0.0.0] quit
[PE1-ospf-100] quit
[PE1] bgp 100
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] import-route direct
[PE1-bgp-vpn1] import-route ospf 100
[PE1-bgp-vpn1] quit
[PE1-bgp] quit
# Configure PE2.
[PE2] ip vpn-instance vpn1
[PE2-vpn-instance-vpn1] route-distinguisher 100:2
[PE2-vpn-instance-vpn1] vpn-target 1:1
[PE2-vpn-instance-vpn1] quit
[PE2] interface vlanif 60
[PE2-Vlanif60] ip binding vpn-instance vpn1
[PE2-Vlanif60] ip address 120.1.1.1 24
[PE2-Vlanif60] quit
[PE2] ospf 100 vpn-instance vpn1
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-119

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals