Huawei Quidway S9300

mpls lsr-id 1.1.1.9
mpls
lsp-trigger all
#
mpls ldp
#
interface Vlanif 10
ip address 10.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface Vlanif 50
ip binding vpn-instance vpn1
ip address 100.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
interface LoopBack10
ip binding vpn-instance vpn1
ip address 5.5.5.5 255.255.255.255
#
bgp 100
peer 3.3.3.9 as-number 100
peer 3.3.3.9 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 3.3.3.9 enable
#
ipv4-family vpnv4
policy vpn-target
peer 3.3.3.9 enable
#
ipv4-family vpn-instance vpn1
import-route direct
import-route ospf 100
#
ospf 1
area 0.0.0.0
network 1.1.1.9 0.0.0.0
network 10.1.1.0 0.0.0.255
#
ospf 100 vpn-instance vpn1
import-route bgp
domain-id 0.0.0.10
area 0.0.0.0
network 100.1.1.0 0.0.0.255
sham-link 5.5.5.5 6.6.6.6 cost 1
#
return
l Configuration file of P
#
sysname P
#
vlan batch 10 40
#
mpls lsr-id 2.2.2.9
mpls
lsp-trigger all
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-123