Huawei Quidway S9300

ip binding vpn-instance vpn1
ip address 6.6.6.6 255.255.255.255
#
bgp 100
peer 1.1.1.9 as-number 100
peer 1.1.1.9 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 1.1.1.9 enable
#
ipv4-family vpnv4
policy vpn-target
peer 1.1.1.9 enable
#
ipv4-family vpn-instance vpn1
import-route direct
import-route ospf 100
#
ospf 1
area 0.0.0.0
network 3.3.3.9 0.0.0.0
network 40.1.1.0 0.0.0.255
#
ospf 100 vpn-instance vpn1
import-route bgp
domain-id 0.0.0.10
area 0.0.0.0
network 120.1.1.0 0.0.0.255
sham-link 6.6.6.6 5.5.5.5 cost 1
#
return
l Configuration file of CE1
#
sysname CE1
#
vlan batch 20 50
#
interface Vlanif20
ip address 20.1.1.1 255.255.255.0
ospf cost 10
#
interface Vlanif50
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
ospf 1
area 0.0.0.0
network 100.1.1.0 0.0.0.255
network 20.1.1.0 0.0.0.255
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 30 60
#
interface vlanif 30
ip address 30.1.1.2 255.255.255.0
ospf cost 10
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-125