Huawei Quidway S9300

Destination: 10.3.1.0/24
Protocol: BGP Process ID: 0
Preference: 255 Cost: 0
NextHop: 3.3.3.3 Neighbour: 3.3.3.3
State: Inactive Adv GotQ Age: 00h17m56s
Tag: 0 Priority: 0
Label: 15362 QoSInfo: 0x0
RelayNextHop: 0.0.0.0 Interface: Vlanif30
TunnelID: 0x10001
Destination: 10.3.1.0/24
Protocol: BGP Process ID: 0
Preference: 255 Cost: 0
NextHop: 2.2.2.2 Neighbour: 2.2.2.2
State: Active Adv GotQ Age: 00h15m06s
Tag: 0 Priority: 0
Label: 15361 QoSInfo: 0x0
RelayNextHop: 0.0.0.0 Interface: Vlanif10
TunnelID: 0x10002
BkNextHop: 3.3.3.3 BkInterface:
BkLabel: 15362 SecTunnelID: 0x0
BkPETunnelID: 0x10001 BkPESecTunnelID: 0x0
Step 10 To disable VPN FRR, run the undo vpn frr command.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] undo vpn frr
[PE1-vpn-instance-vpn1] quit
# After disabling VPN FRR, view the backup next hop, backup label, and backup tunnel ID.
<PE1> display ip routing-table vpn-instance vpn1 10.3.1.0 verbose
Routing Table : vpn1
Summary Count : 2
Destination: 10.3.1.0/24
Protocol: BGP Process ID: 0
Preference: 255 Cost: 0
NextHop: 3.3.3.3 Neighbour: 3.3.3.3
State: Inactive Adv GotQ Age: 00h19m05s
Tag: 0 Priority: 0
Label: 15362 QoSInfo: 0x0
RelayNextHop: 0.0.0.0 Interface: Vlanif30
TunnelID: 0x10001
Destination: 10.3.1.0/24
Protocol: BGP Process ID: 0
Preference: 255 Cost: 0
NextHop: 2.2.2.2 Neighbour: 2.2.2.2
State: Active Adv GotQ Age: 00h00m10s
Tag: 0 Priority: 0
Label: 15361 QoSInfo: 0x0
RelayNextHop: 0.0.0.0 Interface: Vlanif10
TunnelID: 0x10002
----End
Configuration Files
l Configuration file of PE1
#
sysname PE1
#
vlan batch 10 30
#
ip vpn-instance vpn1
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-143