Huawei Quidway S9300

#
ip vpn-instance vpn1
route-distinguisher 100:2
vpn-target 111:1 export-extcommunity
vpn-target 111:1 import-extcommunity
#
mpls lsr-id 2.2.2.2
mpls
label advertise non-null
#
mpls ldp
#
interface vlanif 10
ip address 100.1.1.2 255.255.255.252
mpls
mpls ldp
#
interface vlanif 20
ip binding vpn-instance vpn1
ip address 10.1.1.2 255.255.255.252
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface LoopBack1
ip address 2.2.2.2 255.255.255.255
#
bgp 100
peer 1.1.1.1 as-number 100
peer 1.1.1.1 connect-interface LoopBack0
#
ipv4-family unicast
undo synchronization
peer 1.1.1.1 enable
#
ipv4-family vpnv4
policy vpn-target
peer 1.1.1.1 enable
#
ipv4-family vpn-instance vpn1
peer 10.1.1.1 as-number 65410
import-route direct
#
ospf 1
area 0.0.0.0
network 100.1.1.0 0.0.0.3
network 2.2.2.2 0.0.0.0
#
return
l Configuration file of PE3
#
sysname PE3
#
vlan batch 30 40
#
ip vpn-instance vpn1
route-distinguisher 100:3
vpn-target 111:1 export-extcommunity
vpn-target 111:1 import-extcommunity
#
mpls lsr-id 3.3.3.3
mpls
label advertise non-null
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 3 BGP/MPLS IP VPN Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-145