After the VLL FRR is configured, L2VPN traffic is rapidly switched to the backup path when
a fault occurs on the master path. After the fault on the master path is rectified, the L2VPN traffic
is switched back to the master path according to the revertive switchover policy.
4.10 Maintaining the VLL
This section describes how to clear the operating status of VLL, reset BGP connections of the
VLL, and debug the L2VPN.
4.11 Configuration Examples
This section provides several examples of VLL configuration.
4 VLL Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
4-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)
To Next Page
Loading...
