EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
<PE1> display mpls static-l2vc interface Vlanif 10
*Client Interface : Vlanif10 is up
AC Status : up
VC State : up
VC ID : 0
VC Type : VLAN
Destination : 3.3.3.9
Transmit VC Label : 100
Receive VC Label : 200
Control Word : Disable
VCCV Capabilty : Disable
Tunnel Policy : --
PW Template Name : --
Traffic Behavior : --
Main or Secondary : Main
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL Type : lsp , TNL ID : 0x2014
Create time : 0 days, 0 hours, 18 minutes, 16 seconds
UP time : 0 days, 0 hours, 4 minutes, 13 seconds
Last change time : 0 days, 0 hours, 4 minutes, 13 seconds
Run the display l2vpn ccc-interface vc-type static-vc up command, and you can see that the
VC type is static VC and the status is Up. Take the display on PE1 for example.
<PE1> display l2vpn ccc-interface vc-type static-vc up
Total ccc-interface of SVC VC: 1
up (1), down (0)
Interface Encap Type State VC Type
Vlanif10 vlan up static-vc
Run the display ip routing-table command on the CE, and you can see that CE1 and CE2 can
learn the interface routes of each other.
Take the display on CE1 for example.
<CE1> display ip routing-table
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost Flags NextHop Interface
100.1.1.0/24 Direct 0 0 D 100.1.1.1 Vlanif10
100.1.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
100.1.1.2/32 Direct 0 0 D 100.1.1.2 Vlanif10
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
CE1 and CE2 can ping each other.
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=46 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=91 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=74 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=88 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=82 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 46/76/91 ms
----End
4 VLL Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
4-50 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals