EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
# Configure PE2: Create a VC on VLANIF 40, which is connected to CE2.
[PE2] mpls l2vpn
[PE2-l2vpn] mpls l2vpn default martini
[PE2-l2vpn] quit
[PE2] interface vlanif 40
[PE2-Vlanif40] mpls l2vc 1.1.1.9 101
[PE2-vlanif40] quit
Step 6 Verify the configuration.
View the L2VPN connection information on the PEs, and you can see that an L2VC is set up
and is in Up state.
Take the display on PE1 for example.
<PE1> display mpls l2vc interface vlanif 10
*client interface : Vlanif10 is up
session state : up
AC state : up
VC state : up
VC ID : 101
VC type : VLAN
destination : 3.3.3.9
local group ID : 0 remote group ID : 0
local VC label : 21504 remote VC label : 21504
local AC OAM State : up
local PSN State : up
local forwarding state : forwarding
BFD for PW : unavailable
manual fault : not set
active state : active
forwarding entry : not exist
link state : up
local VC MTU : 1500 remote VC MTU : 1500
local VCCV : Disable
remote VCCV : none
local control word : disable remote control word : none
tunnel policy name : --
traffic behavior name : --
PW template name : --
primary or secondary : primary
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL type : lsp , TNL ID : 0x10007
create time : 0 days, 0 hours, 4 minutes, 19 seconds
up time : 0 days, 0 hours, 3 minutes, 45 seconds
last change time : 0 days, 0 hours, 3 minutes, 45 seconds
CE1 and CE2 can ping each other.
Take the display on CE1 for example.
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=28 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/15/31 ms
----End
4 VLL Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
4-56 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals