Huawei Quidway S9300

Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of PE1
#
sysname PE1
#
vlan batch 10 20
#
mpls lsr-id 1.1.1.1
mpls
#
mpls l2vpn
#
mpls ldp
#
interface Vlanif10
#
interface Vlanif 20
ip address 20.1.1.1 255.255.255.252
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 20
#
mpls l2vpn vpn1 encapsulation vlan
route-distinguisher 100:1
vpn-target 1:1 import-extcommunity
vpn-target 1:1 export-extcommunity
ce ce1 id 1 range 10 default-offset 0
connection ce-offset 2 interface Vlanif10
#
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
#
bgp 100
peer 2.2.2.2 as-number 100
peer 2.2.2.2 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 2.2.2.2 enable
#
l2vpn-family
policy vpn-target
peer 2.2.2.2 enable
#
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 4 VLL Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-83