Huawei Quidway S9300

Example
Run the display mpls l2vc [ vc-id | interface interface-type interface-number ] command, and
you can see that the status of the master and backup PWs is Up, the VC status of the master PW
is Active, and VC status of the backup PW is Inactive. The following is an example:
<Quidway> display mpls l2vc interface vlanif 10
*client interface : Vlanif10 is up
session state : up
AC state : up
VC state : up
VC ID : 100
VC type : VLAN
destination : 3.3.3.3
local group ID : 0 remote group ID : 0
local VC label : 21504 remote VC label : 21504
local AC OAM State : up
local PSN State : up
local forwarding state : forwarding
remote AC OAM state : up
remote PSN state : up
remote forwarding state: forwarding
BFD for PW : unavailable
manual fault : not set
active state : active
forwarding entry : exist
link state : up
local VC MTU : 1500 remote VC MTU : 1500
local VCCV : cw bfd
remote VCCV : cw bfd
local control word : enable remote control word : enable
tunnel policy name : p1
traffic behavior name : --
PW template name : 1to3
primary or secondary : primary
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL type : cr lsp, TNL ID : 0x10002
create time : 0 days, 0 hours, 12 minutes, 47 seconds
up time : 0 days, 0 hours, 2 minutes, 11 seconds
last change time : 0 days, 0 hours, 2 minutes, 11 seconds
*client interface : Vlanif10 is up
session state : up
AC state : up
VC state : up
VC ID : 200
VC type : VLAN
destination : 2.2.2.2
local group ID : 0 remote group ID : 0
local VC label : 21505 remote VC label : 21504
local AC OAM state : up
local PSN state : up
local forwarding state : forwarding
remote AC OAM state : up
remote PSN state : up
remote forwarding state: forwarding
BFD for PW : unavailable
manual fault : not set
active state : inactive
forwarding entry : existent
link state : up
local VC MTU : 1500 remote VC MTU : 1500
local VCCV : cw bfd
remote VCCV : cw bfd
local control word : enable remote control word : enable
tunnel policy name : --
traffic behavior name : --
PW template name : 1to2
primary or secondary : secondary
5 PWE3 Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
5-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)