Huawei Quidway S9300

Switch-l2vc tunnel info :
1 tunnels for peer 5.5.5.9
NO.0 TNL Type : lsp , TNL ID : 0x20026
1 tunnels for peer 1.1.1.9
NO.0 TNL Type : lsp , TNL ID : 0x10020
Create time : 0 days, 0 hours, 12 minutes, 13 seconds
UP time : 0 days, 0 hours, 5 minutes, 16 seconds
Last change time : 0 days, 0 hours, 5 minutes, 16 seconds
CE1 and CE2 can ping each other.
Take the display on CE1 for example.
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=188 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=187 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=187 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=188 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=188 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 187/187/188 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet21/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of U-PE1
#
sysname U-PE1
#
vlan batch 10 20
#
mpls lsr-id 1.1.1.9
mpls
#
mpls l2vpn
#
pw-template pwt
peer-address 3.3.3.9
#
mpls ldp
#
interface Vlanif10
mpls static-l2vc pw-template pwt 100 transmit-vpn-label 100 receive-vpn-label
100
#
interface Vlanif20
ip address 10.1.1.1 255.255.255.0
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 5 PWE3 Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-47