Huawei Quidway S9300

network 4.4.4.9 0.0.0.0
network 30.1.1.0 0.0.0.255
network 40.1.1.0 0.0.0.255
#
return
l Configuration file of U-PE2
#
sysname U-PE2
#
vlan batvh 50 60
#
mpls lsr-id 5.5.5.9
mpls
#
mpls l2vpn
#
pw-template pwt
peer-address 3.3.3.9
#
mpls ldp
#
interface Vlanif50
ip address 40.1.1.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif60
mpls static-l2vc pw-template pwt 100 transmit-vpn-label 200 receive-vpn-label
200
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 50
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 60
#
interface LoopBack0
ip address 5.5.5.9 255.255.255.255
#
ospf 1
area 0.0.0.0
network 5.5.5.9 0.0.0.0
network 40.1.1.0 0.0.0.255
#
return
l Configuration file of CE1
#
sysname CE1
#
vlan batch 60
#
interface Vlanif60
ip address 100.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 60
#
return
5 PWE3 Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
5-50 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)