Huawei Quidway S9300

#
vlan batch 10
#
interface Vlanif10
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of U-PE1
#
sysname U-PE1
#
vlan batch 10 20
#
mpls lsr-id 1.1.1.9
mpls
#
mpls l2vpn
#
pw-template pwt
peer-address 3.3.3.9
control-word
vccv cc cw cv lsp-ping
#
mpls ldp
#
mpls ldp remote-peer 3.3.3.9
remote-ip 3.3.3.9
#
interface Vlanif10
mpls l2vc pw-template pwt 100
#
interface Vlanif 20
ip address 10.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 20
#
interface LoopBack0
ip address 1.1.1.9 255.255.255.255
#
ospf 1
area 0.0.0.0
network 10.1.1.0 0.0.0.255
network 1.1.1.9 0.0.0.0
#
return
l Configuration file of P1
#
sysname P1
#
vlan batch 20 30
#
mpls lsr-id 2.2.2.9
mpls
#
mpls ldp
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 5 PWE3 Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-63