Huawei Quidway S9300

mpls te commit
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 1.1.1.1 0.0.0.0
network 100.13.1.0 0.0.0.3
network 100.12.1.0 0.0.0.3
mpls-te enable
#
tunnel-policy p1
tunnel select-seq cr-lsp load-balance-number 1
#
return
l Configuration file of P
#
sysname P
#
vlan batch 20 30
#
mpls lsr-id 4.4.4.4
mpls
mpls te
mpls rsvp-te
#
interface Vlanif20
ip address 100.13.1.2 255.255.255.252
mpls
mpls te
mpls te max-link-bandwidth 50
mpls te max-reservable-bandwidth 30
mpls rsvp-te
#
interface Vlanif30
ip address 100.34.1.1 255.255.255.252
mpls
mpls te
mpls te max-link-bandwidth 50
mpls te max-reservable-bandwidth 30
mpls rsvp-te
#
interface GigabitEthernet2/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
interface GigabitEthernet2/0/2
port link-type trunk
port trunk allow-pass vlan 30
#
interface LoopBack1
ip address 4.4.4.4 255.255.255.255
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 100.13.1.0 0.0.0.3
network 100.34.1.0 0.0.0.3
network 4.4.4.4 0.0.0.0
mpls-te enable
#
return
l Configuration file of PE3
#
sysname PE3
#
vlan batch 30 60
#
mpls lsr-id 3.3.3.3
5 PWE3 Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
5-90 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)