Huawei Quidway S9300

Service Class : --
Color : --
DomainId : 0
Domain Name :
VSI State : up
VSI ID : 100
*Peer Router ID : 3.3.3.9
VC Label : 23552
Peer Type : dynamic
Session : up
Tunnel ID : 0x10021,
*Peer Router ID : 4.4.4.9
VC Label : 100
Peer Type : static
Tunnel ID : 0x20024,
**PW Information:
*Peer Ip Address : 4.4.4.9
PW State : up
Local VC Label : 100
Remote VC Label : 100
PW Type : MEHVPLS
Tunnel ID : 0x20024,
*Peer Ip Address : 3.3.3.9
PW State : up
Local VC Label : 23552
Remote VC Label : 23552
PW Type : label
Tunnel ID : 0x10021,
CE1 and CE2, which reside in the same network segment, can ping each other successfully.
After you run the shutdown command on VLANIF 10 (to which the VSI is bound) of
UPE1, CE1 and CE2 cannot ping each other successfully. This indicates that user data is
transmitted through the PW of this VSI.
Before VLANIF 20 of SPE1 is shut down, check the MAC addresses learnt by the VSI on
SPE2.
<SPE2> display mac-address dynamic
MAC Address VLAN/VSI Port Type Lsp
----------------------------------------------------------------------------
0000-c101-0102 v100 Vlanif20 dynamic 3/3366
Total matching items displayed = 2
After VLANIF 20 of SPE1 is shut down, the VSI bound to the static VLL becomes Down.
Check MAC addresses learnt by the VSI on SPE2, and you can find that one MAC address
learned from VLANIF 20 is deleted.
<SPE2> display mac-address dynamic
MAC Address VLAN/VSI Port Type
Lsp
----------------------------------------------------------------------------
Total matching items displayed = 0
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 6 VPLS Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-63