Huawei Quidway S9300

ip address unnumbered interface loopback1
tunnel-protocol mpls te
destination 1.1.1.1
mpls te tunnel-id 11
mpls te bandwidth bc0 5000
mpls te commit
#
interface Tunnel1/0/2
ip address unnumbered interface loopback1
tunnel-protocol mpls te
destination 1.1.1.1
mpls te tunnel-id 22
mpls te bandwidth bc0 10000
mpls te reserved-for-binding
mpls te commit
#
bgp 100
peer 1.1.1.1 as-number 100
peer 1.1.1.1 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 1.1.1.1 enable
#
ipv4-family vpnv4
policy vpn-target
peer 1.1.1.1 enable
#
ipv4-family vpn-instance VPNA
peer 10.3.1.1 as-number 65420
#
ipv4-family vpn-instance VPNB
peer 10.4.1.1 as-number 65420
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 100.1.1.0 0.0.0.3
network 2.2.2.2 0.0.0.0
mpls-te enable
#
tunnel-policy policy1
tunnel binding destination 1.1.1.1 te Tunnel1/0/2
#
tunnel-policy policy2
tunnel select-seq cr-lsp lsp load-balance-number 1
#
return
l Configuration file of CE1
#
sysname CE1
#
vlan batch 30
#
interface Vlanif30
ip address 10.1.1.1 255.255.255.252
#
interface GigabitEthernet1/0/3
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
bgp 65410
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
import-route direct
peer 10.1.1.2 enable
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 1 VPN Tunnel Management
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-37