Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State PrefRcv
2.2.2.2 4 100 11 13 0 00:09:04 Established 0
Step 5 Enable MPLS L2VPN on PEs and ASBR-PEs.
# Configure PE1.
[PE1] mpls l2vpn
# Configure ASBR-PE1.
[ASBR-PE1] mpls l2vpn
# Configure ASBR-PE2.
[ASBR-PE2] mpls l2vpn
# Configure PE2.
[PE2] mpls l2vpn
Step 6 Configure VSIs on PEs and ASBR-PEs and bind the VSIs to related AC interfaces.
# Configure PE1.
[PE1] vsi v1 auto
[PE1-vsi-v1] pwsignal bgp
[PE1-vsi-v1-bgp] route-distinguisher 100:1
[PE1-vsi-v1-bgp] vpn-target 1:1 import-extcommunity
[PE1-vsi-v1-bgp] vpn-target 1:1 export-extcommunity
[PE1-vsi-v1-bgp] site 1 range 5 default-offset 0
[PE1-vsi-v1-bgp] quit
[PE1-vsi-v1] quit
[PE1] interface vlanif 10
[PE1-Vlanif10] l2 binding vsi v1
[PE1-Vlanif10] quit
# Configure ASBR-PE1.
[ASBR-PE1] vsi v1 auto
[ASBR-PE1-vsi-v1] pwsignal bgp
[ASBR-PE1-vsi-v1-bgp] route-distinguisher 100:2
[ASBR-PE1-vsi-v1-bgp] vpn-target 1:1 import-extcommunity
[ASBR-PE1-vsi-v1-bgp] vpn-target 1:1 export-extcommunity
[ASBR-PE1-vsi-v1-bgp] site 2 range 5 default-offset 0
[ASBR-PE1-vsi-v1-bgp] quit
[ASBR-PE1-vsi-v1] quit
[ASBR-PE1] interface vlanif 30
[ASBR-PE1-Vlanif30] l2 binding vsi v1
[ASBR-PE1-Vlanif30] quit
# Configure ASBR-PE2.
[ASBR-PE2] vsi v1 auto
[ASBR-PE2-vsi-v1] pwsignal bgp
[ASBR-PE2-vsi-v1-bgp] route-distinguisher 200:1
[ASBR-PE2-vsi-v1-bgp] vpn-target 1:1 import-extcommunity
[ASBR-PE2-vsi-v1-bgp] vpn-target 1:1 export-extcommunity
[ASBR-PE2-vsi-v1-bgp] site 1 range 5 default-offset 0
[ASBR-PE2-vsi-v1-bgp] quit
[ASBR-PE2-vsi-v1] quit
[ASBR-PE2] interface vlanif 30
[ASBR-PE2-Vlanif30] l2 binding vsi v1
[ASBR-PE2-Vlanif30] quit
# Configure PE2.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 6 VPLS Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-79
To Next Page
Loading...
