Huawei Quidway S9300

bgp 100
peer 1.1.1.1 as-number 100
peer 1.1.1.1 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 1.1.1.1 enable
#
vpls-family
policy vpn-target
peer 1.1.1.1 enable
#
return
l Configuration file of ASBR-PE2
#
sysname ASBR-PE2
#
vlan batch 30 40
#
mpls lsr-id 3.3.3.3
mpls
#
mpls l2vpn
#
vsi v1 auto
pwsignal bgp
route-distinguisher 200:1
vpn-target 1:1 import-extcommunity
vpn-target 1:1 export-extcommunity
site 1 range 5 default-offset 0
#
mpls ldp
#
isis 1
network-entity 10.0000.0000.0003.00
#
interface Vlanif30
l2 binding vsi v1
#
interface Vlanif40
ip address 100.3.1.1 255.255.255.252
isis enable 1
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 30
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 30
#
interface LoopBack1
ip address 3.3.3.3 255.255.255.255
isis enable 1
#
bgp 200
peer 4.4.4.4 as-number 200
peer 4.4.4.4 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 4.4.4.4 enable
#
vpls-family
policy vpn-target
peer 4.4.4.4 enable
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 6 VPLS Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-83