Huawei Quidway S9300

destination 1.1.1.9
mpls te tunnel-id 100
mpls te bandwidth bc0 20000
mpls te reserved-for-binding
mpls te commit
#
tunnel-policy policy1
tunnel binding destination 1.1.1.9 te tunnel1/0/0
#
return
l Configuration file of CE1
#
sysname CE1
#
vlan batch 1 4
#
interface Vlanif1
ip address 10.1.1.1 255.255.255.0
#
interface Vlanif4
ip address 20.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 1
#
interface GigabitEthernet1/0/3
port link-type trunk
port trunk allow-pass vlan 4
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 2
#
interface Vlanif2
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 2
#
return
l Configuration file of CE3
#
sysname CE3
#
vlan batch 3
#
interface Vlanif2
ip address 20.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 3
#
return
1 VPN Tunnel Management
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
1-52 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)