EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE1] isis 50 vpn-instance vpn1
[PE1-isis-50] network-entity 50.0000.0000.0002.00
[PE1-isis-50] quit
[PE1] interface tunnel1/0/0
[PE1-Tunnel1/0/0] isis enable 50
[PE1-Tunnel1/0/0] quit
Step 7 Configure the IS-IS route between CE2 and PE2.
# Configure CE2.
[CE2] isis 50
[CE2-isis-50] network-entity 50.0000.0000.0004.00
[CE2-isis-50] quit
[CE2] interface vlanif 50
[CE2-Vlanif50] isis enable 50
[CE2-Vlanif50] quit
[CE2] interface vlanif 60
[CE2-Vlanif60] isis enable 50
[CE2-Vlanif60] quit
# Configure PE2.
[PE2] isis 50 vpn-instance vpn1
[PE2-isis-50] network-entity 50.0000.0000.0003.00
[PE2-isis-50] quit
[PE2] interface vlanif50
[PE2-Vlanif50] isis enable 50
[PE2-Vlanif50] quit
Step 8 Set up the MP-BGP peer relationship between PE1 and PE2.
# On PE1, specify PE2 as an IBGP peer, set up the IBGP connection by using the loopback
interface, and enable the capability of exchanging VPN IPv4 routing information between PE1
and PE2.
[PE1] bgp 100
[PE1-bgp] peer 3.3.3.9 as-number 100
[PE1-bgp] peer 3.3.3.9 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpnv4] peer 3.3.3.9 enable
[PE1-bgp-af-vpnv4] quit
# Enter the view of the BGP VPN instance vpn1 and import the direct routes and IS-IS routes.
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] import-route direct
[PE1-bgp-vpn1] import-route isis 50
# On PE2, specify PE1 as an IBGP peer, set up the IBGP connection by using the loopback
interface, and enable the capability of exchanging VPN IPv4 routing information between PE2
and PE1.
[PE2] bgp 100
[PE2-bgp] peer 1.1.1.9 as-number 100
[PE2-bgp] peer 1.1.1.9 connect-interface loopback 1
[PE2-bgp] ipv4-family vpnv4
[PE2-bgp-af-vpnv4] peer 1.1.1.9 enable
[PE2-bgp-af-vpnv4] quit
# Enter the view of the BGP VPN instance vpn1 and import the direct routes and IS-IS routes.
[PE2-bgp] ipv4-family vpn-instance vpn1
[PE2-bgp-vpn1] import-route direct
[PE2-bgp-vpn1] import-route isis 50
Step 9 Import BGP routes into IS-IS.
# Configure PE1.
Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN 2 GRE Configuration
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-27

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals