Opening the machine enclosure
Fig. 34 Open the enclosure (oil separator cartridge changing)
1 Access panel
2 Cover plate
1. Remove enclosure panels 1 .
2. Remove the cover plate 2 .
Changing the oil separator cartridge
➤ Lift the oil separator cartridge with lifting tackle or the aid of at least one other person.
Fig. 35 Changing the oil separator cartridge
1 Screw fitting
2 Dirt trap
3 Screw fitting
4 Air pipe
5 Fixing screw
6 Clamping nut
7 Gasket
8 Oil separator cartridge
9 Minimum pressure/check valve
1. WARNING!
Compressed gas!
Compressed gas and devices under gas pressure can injure or cause death if the contained
energy of the gas is released suddenly or uncontrolled.
➤ De-pressurise all pressurised components and enclosures.
10 Maintenance
10.18 Changing the oil separator cartridge
76
Service Manual Screw Compressor
ESD 442/14 bar (abs) SFC SIGMA CONTROL 2 ESD_2C_10357405_10–LIN_00 E
To Next Page