10 Resetting maintenance interval counters
Example: Resetting the maintenance counter for the oil filter.
Precondition Maintenance has been performed.
Warning message has been acknowledged.
Access level 2 is activated.
The display shows the operating mode.
Maintenance menu
1. Press «Enter».
The main menu is displayed.
2. Select the
< Maintenance >
menu.
The maintenance counter for
Oil filter
is displayed in the active line.
3. Press «DOWN» once.
4. Press the «Right» key once.
5. Press «Enter» to switch into setting mode.
The
Reset
check box flashes.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
4 Maintenance
Menu
Oil filter
6000 h ¦ 0005 h Reset: ☐
Active line, maintenance interval, remaining service
life
·········
Oil separator
6000 h ¦ 3000 h Reset: ☐
·········
6. Use «UP» or«DOWN» to activate the Reset check box.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
4 Maintenance
Menu
Oil filter
6000 h ¦ 6000 h Reset: ☒
Active line, maintenance interval, remaining new
service life
·········
Oil separator
6000 h ¦ 3000 h Reset: ☐
·········
7. Press «Enter» to accept the setting.
The remaining service life of the new oil filter complies with the defined maintenance interval of
3000 h (depending on the machine type).
Result The check box for Reset is deactivated automatically.
10 Resetting maintenance interval counters
9_9450 03 USE
Quick user guide Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
15
To Next Page
Loading...
