2 Technical Specifications
2.1 Nameplate
The model designation and important technical information are given on the machine's nameplate.
The nameplate is located on the outside of the machine:
■ above the cooler, or
■ on the rear of the machine.
➤ Enter here the nameplate data as a reference:
Feature Value
Rotary screw compressor
Article No.
Serial No.
Year of manufacture
Rated power
Rated motor speed
Maximum working pressure (abs)
Ambient temperature
Tab. 3 Nameplate
2.2 Options
The table contains a list of possible options.
➤ Enter options here as a reference:
Option Option code Available?
SIGMA CONTROL 2 C3
Adjustable machine mountings H1
Air cooling K1
Water cooling
(Plate-type heat exchanger)
K2
Cooling air filter mat K3
Water cooling
(Bundled pipe heat exchanger)
K9
Tab. 4 Options
2.3 Weight
The weight given is the maximum. The actual weights of individual machines are dependent on
equipment fitted.
2 Technical Specifications
2.1 Nameplate
4
Service Manual Screw Compressor
ESD 442/14 bar (abs) SFC SIGMA CONTROL 2 ESD_2C_10357405_10–LIN_00 E
To Next Page
Loading...
