KAESER ESD.2C - Menu: Power Switching; Operating Modes and Control Modes

4.6.2.7 Menu: Power switching
Navigation Function/submenu
10.1.1 Power switching ■ Star-delta start
─ Temperature, warm start
─ Star time at warm start
Star time at cold start
Star/Delta changeover time
─ Overload relay
─ Main contactor
─ Star contactor
─ Delta contactor
■ Direct start
─ Acceleration time
─ Overload relay
─ Main contactor
■ High-voltage cell
─ Acceleration time
─ ready
─ Main contactor
■ SFC USS
─ Service mode
─ Main contactor
■ Softstart
─ Ready
─ Engine running
─ Run-up over
─ Start
─ Reset
─ Main contactor
Tab. 41 Power switching module – menu
4.7 Operating modes and control modes
4.7.1 Operating modes
STOP
The machine is connected to the power supply.
The Controller on LED lights green.
The machine is switched off. The ON LED is extinguished.
READY
The machine has been activated with the «ON» key:
■ The ON LED lights green.
4 Design and Function
4.7 Operating modes and control modes
30
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3 9_9450 03USE