KAESER ESD.2C - Checking;Setting the Date

3. Press the «DOWN» key repeatedly until the current time is displayed as the active line.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
5.1 General
Menu
▶1 System information
·········
Model:
·········
Date/time
13:04:11 08:15:37
Current time
4. Press the «Right» key.
5. Press «Enter» to switch into setting mode.
The hours display flashes. 00: 00: 00 .
6. Use «UP» or «DOWN» to change the hour setting.
7. Press the «Right» key.
The minutes display flashes. 00: 00: 00 .
8. Use «UP» or «DOWN» to change the minute setting.
9. Press the «Right» key.
The seconds display flashes. 00: 00: 00 .
10. Use «UP» or «DOWN» to change the second setting.
11. Press «Enter» to save the settings.
12. Press «Esc» repeatedly to return to the Main Menu.
Checking/setting the date
Precondition Password level 2 is activated,
the < Configuration ➙ General > menu is selected (see 7.2.1).
1. Press the «DOWN» key repeatedly until the current date is displayed as the active line.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
5.1 General
Menu
▶1 System information
·········
Model:
·········
Date/time
13:04:11 08:15:37
Current date
2. Press «Enter» to switch into setting mode.
The day display flashes. 00: 00: 00 .
3. Use «UP» or «DOWN» to change the day setting.
4. Press the «Right» key.
The month display flashes. 00: 00: 00 .
5. Use «UP» or «DOWN» to change the month setting.
6. Press the «Right» key.
The year display flashes. 00: 00: 00 .
7 Initial Start-up
7.2 Configuring the controller
9_9450 03USE
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
43