KAESER ESD.2C - Creating Additional User Accounts; Viewing the IO Modules Assigment

7.3.5 Viewing the IO modules assigment
The assignment of the I/O modules is displayed in the <IO display> menu.
➤ Select the <IO display> menu.
The assignment of the input/output modules is displayed.
7.3.6 Creating additional user accounts
Use the <User administration> menu to create additional user accounts for other employees.
In order to be able to create user accounts, you must active the write mode 2 . The system
will prompt you to enter and confirm your user name and your password (see chapter 7.2.7).
Subsequently, the write mode is activated.
The write mode is granted only to one person at a time.
If a second user attempts to log on in write mode, he will be refused by the system.
The system will return an error message.
String length for personally created user names and passwords:
■ User name: 6 to 16 characters, the second character must not be a number.
■ Password: 6 to 16 characters
Precondition The generated password is available.
KAESER CONNECT for SIGMA CONTROL 2 is displayed.
1. Select the <User administration> menu.
The system displays the <User administration> menu.
7 Initial Start-up
7.3 Using KAESER CONNECT
54
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3 9_9450 03USE