KAESER ESD.2C - Displaying Messages; Information of a Message; Message Type and Status Abbreviations

8.4 Displaying messages
The following information can be called up in the < Status ➙ Messages > menu:
■ Current messages
─ Last fault
─ Last warning
─ Number of currently registered fault and/or warnings
■ The message history stores the last 1000 events, these include fault and warning messages.
─ Compressor messages
─ Diagnostic messages
─ System messages
The information (message) is shown in three lines of the display.
Line Submenu/Segment/Text
1 Selected submenu:
■ Compressor messages
■ Diagnostic messages
■ System messages
2 Segment:
■ Message number
■ Type of message
■ Message status
■ Message date
■ Message time
3 Text:
■ message text
■ –
Tab. 72 Information of a message
Message type and status are shown abbreviated.
Segment Display Meaning
Message number 0059 (example) Message 0059
Type of message W Warning/service message
S Fault message
Message status c Message has come
g Message gone
a Message acknowledged (reset)
Date 21.01.11 (example) Date
Time 16:10:31 (example) Time
Tab. 73 Message type and status abbreviations
8 Operation
8.4 Displaying messages
9_9450 03USE
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
143