RFID sensor field
RFID is the abbreviation for “Radio Frequency Indentification” and enables the identification of per‐
sons or objects.
Placing a suitable transponder in front of the RFID sensor field of the controller will automatically
activate the communication between transponder and SIGMA CONTROL 2 .
A suitable transponder is theKAESER RFID equipment card. Two of them have been provided with
the machine.
Typical application:
■ Users log on to the machine.
(no manual input of the password required.)
Fig. 10 RFID sensor field
Item Description Function
24 RFID RFID sensor field for the communication with a suitable RFID transponder.
Tab. 30 RFID sensor field
Further information More information about the use of RFID technology is provided in the SIGMA CONTROL 2 operat‐
ing manual.
4 Design and Function
4.9 Operating panel SIGMA CONTROL 2
32
Service Manual Screw Compressor
ESD 442/14 bar (abs) SFC SIGMA CONTROL 2 ESD_2C_10357405_10–LIN_00 E
To Next Page
Loading...
