14. Press «DOWN» once.
The
[Login]
line is displayed as the active line.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
7 User
Menu
Name : E00019895
Password: ****************
[Login]
Active line
------------------------------
Current access level: 2
Display access level 0
15. Press «Enter» to accept the settings.
Access level 2
is displayed.
Result You are now logged on to SIGMA CONTROL 2 with access level 2, having manually input your
user name and the generated password.
7.2.7 Generating a password for KAESER CONNECT
You also need a password to access KAESER CONNECT for the SIGMA CONTROL 2.
This password is also generated at the SIGMA CONTROL 2.
Entering the password is necessary to
■ Log on to KAESER CONNECT
■ Activate the write mode in the User accounts menu
➤ Proceed as described for "Generating a password for the SIGMA CONTROL 2”, see chap‐
ter 7.2.5.
7.2.8 Checking/setting the time and date
Precondition Access level 2 is activated.
The display shows the operating mode.
Checking/setting the time
➤ When operating the machine with a timer program, check the time settings at least once
a year.
1. Press «Enter».
The main menu is displayed.
2. Select the
< Configuration ➙ General >
menu.
7 Initial Start-up
7.2 Configuring the controller
42
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3 9_9450 03USE
To Next Page
Loading...
