KAESER ESD.2C - Page 260

3. Press «Enter» to switch into setting mode.
A column with alphanumeric characters is displayed.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
7 User
Menu
Name : E00019895
Password: ****************
[Login]
Active line
------------------------------
Current access level: 0
Display access level 0
4. Repeatedly press «DOWN» or «UP» until the requested character is displayed.
5. Press the «Right» key.
The cursor jumps to the next position.
6. Complete the remaining characters of the name.
7. Press «Enter» to accept the settings.
The user name has been entered.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
7 User
Menu
Name : E00019895
Active line, user name
Password: ****************
[Login]
------------------------------
Current access level: 0
Display access level 0
8. Press «DOWN» once.
The Password line is displayed as the active line.
9. Press «Enter» to switch into setting mode.
A column with alphanumeric characters is displayed.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
7 User
Menu
Name : E00019895
Password: ****************
Active line, password
[Login]
------------------------------
Current access level: 0
Display access level 0
10. Repeatedly press «DOWN» or «UP» until the requested character is displayed.
11. Press the «Right» key.
The cursor jumps to the next position.
12. Complete the remaining characters of the password.
13. Press «Enter» to accept the settings.
7 Initial Start-up
7.2 Configuring the controller
9_9450 03USE
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
41