KAESER ESD.2C - Page 178

3 Setting the display language
Precondition The display shows the operating mode.
1. Press «Enter».
The main menu is displayed.
2. Press the «UP» or «DOWN» keys until the current language is shown as active line.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
Main menu
········· Deutsch ·········
Active line with current language
▶1 xxxxxxxxxx
Submenu
▶2 xxxxxxxxxx
Submenu
▶3 xxxxxxxxxx
Submenu
▶4 xxxxxxxxxx
Submenu
▶5 xxxxxxxxxx
Submenu
3. Use the «Enter» key to switch to setting mode.
The currently set language flashes.
4. Move to the required language with «UP »or «DOWN».
5. Confirm the setting with «Enter».
6. Press «Escape» repeatedly to return to the main menu.
Result The display texts are now in the selected language.
3 Setting the display language
9_9450 03 USE
Quick user guide Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
3