Spring forces
Springs under tension or compression store energy. Uncontrolled release of this energy can cause
serious injury or death.
Minimum pressure / check valves, pressure relief valves and inlet valves are powerfully spring-loa‐
ded.
➤ Do not open or dismantle any valves.
Rotating components
Touching the fan wheel, the coupling or the belt drive while the machine is switched on can result
in serious injury.
➤ Do not open the enclosure while the machine is switched on.
➤ Switch off and lock out the power supply disconnecting device and verify the absence of any
voltage.
➤ Wear close-fitting clothes and a hair net if necessary.
➤ Ensure that all covers and safety guards are in place and secured before re-starting.
Temperature
High temperatures are generated during compression. Touching hot components may cause inju‐
ries.
➤ Avoid contact with hot components.
➤ Wear protective clothing.
Noise
The enclosure absorbs the machine noise to a tolerable level. This function will be effective only if
the enclosure is closed.
➤ Operate the machine only with intact sound insulation.
➤ Wear hearing protection if necessary.
Operating fluids/materials
The used operating fluids and materials can cause adverse health effects. Suitable safety meas‐
ures must be taken in order to prevent injuries.
➤ Strictly forbid fire, open flame and smoking.
➤ Follow safety regulations when dealing with oils, lubricants and chemical substances.
➤ Avoid contact with skin and eyes.
➤ Do not inhale oil mist or vapour.
➤ Do not eat or drink while handling cooling and lubricating fluids.
➤ Keep suitable fire extinguishing agents ready for use.
➤ Use only KAESER approved operating materials.
Unsuitable spare parts
Unsuitable spare parts compromise the safety of the machine.
➤ Use only spare parts approved by the manufacturer for use in this machine.
➤ Use only genuine KAESER replacement parts on pressure bearing parts.
1 Safety and Responsibility
1.1 Safely dealing with sources of danger
2
Spare parts Screw compressor
ESD 442 SFC / 14 bar ESD.2C / 1204/1205 No.: TTL-ESD_2C_10357405_10_00 E
To Next Page
Loading...
