Group 8 Job Editor Page 345
JET3up Release R1.06
All characters following the <Start symbol> in the transmitted string will be
written into the input buffer until a <End symbol> is received. If another <Start
symbol> is received before the <End symbol> was received the current input
buffer content will be discarded and the filling of the buffer will start again.
The number of characters between a <Start symbol> and a <End symbol> may
be shorter than the number of characters defined by the <Wildcards> parameter.
In that case the input buffer is only filled with the relevant characters. If the
number of characters exceeds the number defined by the <Wildcards> before the
<End symbol> is received only the number of characters that are equivalent with
the size of the input buffer will be taken into account. In that case the input buffer
is filled with the first received characters up to the number defined by the size of
the input buffer.
To Next Page
