Lexmark T65 Series Service Manual

Diagnostic information 2-7
7462
Go Back
Previous
Next
54B Std Network Software
Error
This error displays when a
network port is detected, but
the printer cannot establish
communications with it.
The following actions may be
taken:
•Press
to clear the
message and continue
printing.
The job may not print
correctly.
• Program new firmware for
the network interface.
Reset the printer.
54C Network [x] Software
Error
This error displays when a
network port is detected, but
the printer cannot establish
communications with it.
The following actions may be
taken:
• Press to clear the
message and continue
printing.
The job may not print
correctly.
• Program new firmware for
the network interface.
• Reset the printer.
55B Unsupported Option
in Slot [x]
An unsupported option is
installed in the specified
solutions port. Power off the
printer and remove the
unsupported option in the
specified slot.
Remove unsupported option.
56A Parallel Port [x]
Disabled
This error displays when data
is sent to the printer across an
optional parallel port, but the
port has been disabled. Once
this message displays,
reporting of further errors is
suppressed until the menus are
entered, or the printer is reset.
Go to network service check.
See “ADF & Scanner Related
Troubleshooting” on
page 2-175.
56B Serial Port [x]
Disabled
This error displays when data
is sent to the printer across an
serial port, but the port has
been disabled. Once this
message displays, reporting of
further errors is suppressed
until the menus are entered, or
the printer is reset.
Go to network service check.
See “ADF & Scanner Related
Troubleshooting” on
page 2-175.
56C Standard USB Port
Disabled
Displayed when status is
requested over the USB port,
but the port has been disabled.
Once the error has been
displayed for the first time,
reporting of further errors is
suppressed until the menus are
entered or the printer is reset.
The following actions may be
taken:
• Press to clear the
message. The printer
discards any data received
on the USB port.
• Press until Busy/
Waiting appears. The
following are available:
- Reset Printer
Reset Active Bin
Error
code or
message
Error contents Description/Action Possible repair actions

Lexmark T65 Series Specifications

General

Brand	Lexmark
Model	T65 Series
Category	Printer
Language	English