2-8 Service Manual
7462
56E USB Port [x] Disabled Displayed when status is
requested over the USB port,
but the port has been disabled.
Once the error has been
displayed for the first time,
reporting of further errors is
suppressed until the menus are
entered or the printer is reset.
The following actions may be
taken:
• Press to clear the
message. The printer
discards any data received
on the USB port.
• Press until Busy/
Waiting appears. The
following are available:
- Reset Printer
Reset Active Bin
58A Too Many Bins
Attached
This error code displays when
too many bins are attached to
the printer.
1. Turn off and unplug the
printer.
2. Remove the excess bins.
3. Plug in the printer, and turn
it on.
58B Too Many Disks
Installed
This error code displays when
too many disks are attached to
the printer.
1. Turn off and unplug the
printer.
2. Remove the excess disks.
3. Plug in the printer, and turn
it on.
58C Too Many Flash
Options
This error code displays when
too many user flash memory
options or too many optional
firmware cards have been
installed.
User can power off and remove
extra flash options.
1. Turn off and unplug the
printer.
2. Remove the excess flash
memory.
3. Plug in the printer, and turn
it on.
58D Too Many Trays
Attached
This error code displays when
too many input trays are
attached to the printer.
1. Turn off and unplug the
printer.
2. Remove the excess trays.
3. Plug in the printer, and turn
it on.
59A Incompatible Duplex An incompatible duplex option
is installed.
Remove the incompatible
duplex option and press
to clear the message.
Note: If the user installed the
incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.
1. Turn off and unplug the
printer.
2. Remove the incompatible
external duplex unit
assembly.
3. Plug in the printer, and turn
it on.
Error
code or
message
Error contents Description/Action Possible repair actions
To Next Page
Loading...
Need help?
General
