Lexmark T65 Series Service Manual

Diagnostic information 2-15
7462
Go Back
Previous
Next
200.48 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-130.
200.49 Sensor (input)
lingering jam
Source = Tray 4
Tray level = Empty
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-130.
200.57 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Not Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-130.
200.58 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Low
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-130.
200.59 Sensor (input)
lingering jam
Source = Tray 5
Tray level = Empty
The media reached the sensor
(input) but did not clear it within
the specified time.
Go to sensor (input) lingering
jam service check.
See “Sensor (input) lingering
jam service check.” on
page 2-130.
201.00 Sensor (fuser output)
area jam.
Type 1 fuser
The media is jammed in the
sensor (fuser output) area.
Go to sensor (fuser output)
service check.
See “Sensor (fuser output)
service check” on
page 2-108.
201.01 Main drive motor
assembly load error.
Type 1 fuser
The main drive motor assembly
has failed or caused high
mechanical load due to paper
jam or bind.
1. Check all connections on
the main drive motor
assembly.
2. Check all connections on
the system card assembly.
3. Replace the main drive
motor assembly if problem
remains. Go to “Main drive
motor assembly removal”
on page 4-20.
201.02 Sensor (fuser output)
late jam.
Type 1 fuser
The media is late reaching the
sensor (fuser output) within the
specified time.
Go to sensor (fuser output) late
jam service check.
See “Sensor (fuser output)
late jam service check.” on
page 2-133.
If problem remains, a type 2
fuser can be installed.
201.04 Sensor (narrow
media) late jam
Type 1 fuser
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
Go to sensor (narrow media)
late jam service check.
See “Sensor (narrow media)
late jam service check.” on
page 2-136.
Error
code or
message
Error contents Description/Action Possible repair actions

Lexmark T65 Series Specifications

General

Brand	Lexmark
Model	T65 Series
Category	Printer
Language	English