2-28 Service Manual
7462
230.00 Paper jam around
internal duplex.
Source = Internal
duplex
Page may be jammed in
internal duplex area.
1. Remove all media present
in media path.
2. Check for obstructions in
media path.
3. Go to sensor (fuser output)
service check. See
“Sensor (fuser output)
service check” on
page 2-108.
4. Go to sensor (duplex input)
service check. See
“Sensor (duplex input)
service check” on
page 2-109.
230.01 Sensor (duplex input)
lingering jam
Source = Internal
duplex
Media reached the sensor
(duplex input) but did not clear
it in the specified time.
Go to sensor (duplex input)
lingering jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-142.
230.02 Sensor (duplex input)
late jam
Source = Internal
duplex
Media is late reaching the
sensor (duplex input) within the
specified time.
Go to sensor (duplex input) late
jam service check.
See “Sensor (duplex input)
late jam service check.” on
page 2-138.
230.03 Sensor (duplex input)
bounce
Source = Internal
duplex
The sensor (duplex input)
rebounded once the trailing
edge of the media passed.
Go to sensor (duplex input)
service check. See “Sensor
(duplex input) service
check” on page 2-109.
230.04 Sensor (input) late
jam from duplex
Source = Internal
duplex
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
internal duplex.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
230.05 sensor (duplex input)
lingering jam
Source = Internal
duplex
Media reached the sensor
(duplex input) but did not clear
it in the specified time.
Go to sensor (duplex input)
lingering jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-142.
230.06 Sensor (input) late
jam from duplex
Source = Internal
duplex
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
internal duplex.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
230.07 Sensor (input) late
jam from duplex
Source = Internal
duplex
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
internal duplex.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
Error
code or
message
Error contents Description/Action Possible repair actions