Lexmark T65 Series Service Manual

Diagnostic information 2-29
7462
Go Back
Previous
Next
230.08 Internal duplex drive
motor load error
Source = Internal
duplex
The internal duplex drive motor
assembly has failed or caused
high mechanical load during
warm up sequence.
1. Remove all media present
in media path.
2. Check all connections on
the duplex media entrance
drive motor assembly.
3. Check all connections on
the system card assembly.
4. Replace the duplex drive
motor assembly if problem
remains. Go to “Duplex
drive motor assembly
removal” on page 4-9.
230.10 Internal duplex drive
motor control failure.
Source = Internal
duplex
The internal duplex drive motor
motor does not reach the
proper operating speed at the
specified time.
1. Remove all media present
in media path.
2. Check all connections on
the duplex media entrance
drive motor assembly.
3. Check all connections on
the system card assembly.
4. Replace the duplex media
entrance drive motor
assembly if problem
remains. Go to “Duplex
drive motor assembly
removal” on page 4-9.
230.13 sensor (duplex input)
static jam
Source = Internal
duplex
Media remains on the sensor
(duplex input) during the warm
up sequence.
Go to sensor (duplex input)
static jam service check.
See “Sensor (duplex input)
lingering jam service check.”
on page 2-140.
230.14 Paper jam around
internal duplex.
Source = Internal
duplex
Page may be jammed in
internal duplex area.
1. Remove all media present
in media path.
2. Check for obstructions in
media path.
3. Go to sensor (fuser output)
service check. See
“Sensor (fuser output)
service check” on
page 2-108.
4. Go to sensor (duplex input)
service check. See
“Sensor (duplex input)
service check” on
page 2-109.
230.18 Internal duplex drive
motor assembly
underspeed error.
Source = Internal
duplex
The internal duplex drive motor
does not rotate at the specified
speed.
1. Remove all media present
in media path.
2. Check all connections on
the duplex media entrance
drive motor assembly.
3. Check all connections on
the system card assembly.
4. Replace the duplex media
entrance drive motor
assembly if problem
remains. Go to “Duplex
drive motor assembly
removal” on page 4-9.
Error
code or
message
Error contents Description/Action Possible repair actions

Lexmark T65 Series Specifications

General

Brand	Lexmark
Model	T65 Series
Category	Printer
Language	English