Lexmark T65 Series Service Manual

2-30 Service Manual
7462
Go Back
Previous
Next
230.20 Internal duplex drive
motor lost encoder
failure
Source = Internal
duplex
The internal duplex drive motor
is not reporting pulses back to
the engine.
1. Remove all media present
in media path.
2. Check all connections on
the duplex media entrance
drive motor assembly.
3. Check all connections on
the system card assembly.
4. Replace the duplex drive
motor assembly if problem
remains. Go to “Duplex
drive motor assembly
removal” on page 4-9.
231.00 Sensor (duplex input)
late jam
Source = External
duplex
Media is late reaching the
sensor (duplex input) within the
specified time.
Go to sensor (duplex input) late
jam service check.
See “Sensor (duplex input)
late jam service check.” on
page 2-138.
232.00 Sensor (duplex input)
lingering jam
Source = External
duplex
Media reached the sensor
(duplex input) but did not clear
it in the specified time.
Go to sensor (duplex input)
lingering jam service check.
See “Sensor (pass through)
late jam service check” on
page 2-142.
233.00 Sensor (duplex
double-feed) late jam
Source = External
duplex
Media is late reaching the
sensor (duplex double-feed)
within the specified time.
1. Remove all media present
in media path.
2. Check for obstructions in
media path.
3. Ensure the external duplex
assembly is properly
installed.
4. Ensure the rear door of the
external duplex is fully
closed.
5. Check all connections on
the external duplex
assembly.
6. Replace the external
duplex assembly if problem
remains.
Error
code or
message
Error contents Description/Action Possible repair actions

Lexmark T65 Series Specifications

General

Brand	Lexmark
Model	T65 Series
Category	Printer
Language	English