EasyManuals Logo

Lexmark T65 Series Service Manual

Lexmark T65 Series
665 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
Diagnostic information 2-31
7462
Go Back
Previous
Next
234.00 Sensor (duplex exit)
late jam
Source = External
duplex
Media is late reaching the
sensor (duplex exit) within the
specified time.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Ensure the rear door of the
external duplex is fully
closed.
6. Check sensor (duplex exit)
for proper operation. See
“Sensor (duplex exit)
service check (external
duplex only)” on
page 2-110.
7. Check all connections on
the external duplex
assembly.
8. Replace the external
duplex assembly if problem
remains.
235.00 Sensor (duplex
double-feed) lingering
jam
Source = External
duplex
Media reached the sensor
(duplex double-feed) within the
specified time but did not clear
it within the specified time.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Replace the external
duplex assembly if problem
remains.
236.00 Sensor (duplex exit)
lingering jam
Source = External
duplex
Media reached the sensor
(duplex exit) within the
specified time but did not clear
it within the specified time.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Check sensor (duplex exit)
for proper operation.See
“Sensor (duplex exit)
service check (external
duplex only)” on
page 2-110.
6. Replace the external
duplex assembly if problem
remains.
237.00 Sensor (input) late
jam from duplex
Source = External
duplex
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
external duplex.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
Error
code or
message
Error contents Description/Action Possible repair actions

Table of Contents

Other manuals for Lexmark T65 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark T65 Series and is the answer not in the manual?

Lexmark T65 Series Specifications

General IconGeneral
BrandLexmark
ModelT65 Series
CategoryPrinter
LanguageEnglish

Related product manuals