Chapter 6 Motion Function Blocks
Indicate that gear operation is running by applying gear ration.
Indicate that the execution of motion function block is not completed.
Indicate that the current motion function block is controlling the relevant axis.
Indicate that the current motion function block is interrupted while it is running.
Indicate whether an error occurs or not.
Output the number of error occurred while motion function block is running.
(1) This motion function block is the function block that drives the main axis and the sub axis in gear operation (speed
synchronization) by setting the variable value designated by offset as the main axis.
(2) The variable value specified as the main axis should be the LREL type. Example). When specifying the variable to be
allocated to the memory by %ML100 as the main axis value, %ML100 should be LREAL type, and the offset value
specifying a variable is UDINT type and you should input 100 to the VarOffset.
(3) Remaining settings and functions are the same as the MC_GearIn function block.
To Next Page
Loading...
