LSIS XGT Series - I;O Forced On;Off Functions; Forced I;O Setting Method

Chapter 10 CPU Function
10-30
10.6 I/O Forced On/Off Functions
The forced I/O function is used to turn On/Off I/O areas by force regardless of the results of program execution.
10.6.1 Forced I/O Setting Method
Click『Online』-『 Forced I/O setting 』.
The below table represents the items related to the forced I/O setting.
Item
Description
Remarks
Movement of address
You can select the base and slot.
Apply
You can set the forced input and output Enable / Unable
Individual
Flag
You can set the forced I/O Enable / Unable by bit.
Data
You can set the forced I/O data (On/Off) by bit.
View variables/comments
You can check the set input, output variables.
Select All
You can set the forced I/O Enable under the condition that the
whole I/O areas are On.
Delete All
You can delete the forced I/O Enable under the condition that the
whole I/O areas are Off.
Set device
It displays the I/O area where even one bit is set.