Chapter 11 Datalog Function
11.4.3 Save at Designated Time
(1) Description of operation
Save at Designated Interval refers to saving data at Designated Time set by the user. It is different from Designed
Interval Save in that the former collects data at certain intervals, and is capable of saving data at more accurate
points.
Time
Data
Designated Time Designated Time Designated Time
Current
value: 100
Current
value: 60
Current
value: 120
When the designated time is,
the data is saved
(2) Setting Method
(a) Choose XG5000 – [Project Window] - [internal parameter] - [datalog]
This activates the datalog parameter setting window.
(b) Set the group to use on the datalog parameter window.
To Next Page
Loading...
Need help?
General
