LSIS XGT Series - Error Code and Solution

Chapter 11 Datalog Function
11-99
11.10.3 Error Code and Solution
Error codes related to datalog function is as follows.
Items
Error Code
Error Name
Cause and Solution
Note
Overall
Error
Codes
0x0000
No Error
-
0x0001
SD Card
Recognition
Error
It occurs when SD card is damaged, or SD which is not
formatted to FAT32 is mounted.
Format it with FAT32 and try mounting it again. If it is
still not recognized, replace the SD card.
0x0002
Partition
Information
Error
Failed to read partition information.
Format it with FAT32 and try mounting it again. If it is
still not recognized, replace the SD card.
0x0003
File System
Error
Format in FAT32 format and connect SD memory.
0x0004
SD Card Not
Supported
Please connect SD Card with storage of 2GB~16GB.
0x0005
SD Card
Capacity Check
Failed
SD memory capacity test failed, and thus SD cannot
be used. Replace SD memory or re-connect it after
formatting.
0x0006
Lack of Free
Space for SD
Card
The available capacity of SD card is less than 20% of
the maximum capacity. (In case of SD card with more
than 8GB, about 6.4GB, which is about 80% of 8GB, is
used.)
Replace it with another SD card or secure the capacity
by formatting and then re-connect it.
0x0007
Folder Creation
Failed
Datalogging group folder cannot be created in SD card.
Replace the SD card if it is damaged or re-connect it
after formatting.
Group-
specific
Error
Codes
0x0100
Group No. xx
Folder Creation
Error
Format in FAT32 format and connect SD memory.
0x0200
Group No. xx
File Open Error
0x0400
Group No. xx
File Write Error