LSIS XGT Series - Periodic Inspection

Chapter 3 Operation Order and Installation
3-29
3.6.3 Periodic Inspection
Check the following items once or twice every six months, and perform corrective actions as needed.
Check Items
Checking Methods
Judgment
Corrective Actions
Ambient
environment
Ambient temperature
- Measure with
thermometer and
hygrometer
- measure corrosive gas
0 ~ 55 C
Adjust to general standard
(Internal environmental
standard of control section)
Ambient Humidity
5 ~ 95%RH
Ambient pollution level
There should be no
corrosive gases
Controller
conditions
Looseness, Ingress
The module should be
move the unit
The module should
be mounted securely
Retighten screws or hook
Dust or foreign material
Visual check
No dust or foreign
material
Place the product
horizontally so that dust
does not enter the ventilation
holes, and remove dust or
foreign material with a dry
cloth. Be careful not to let
foreign material into the
ventilation holes.
Connecting
conditions
Loose terminal
screws
Re-tighten screws
Screws should not be
loose
Retighten
Distance between
terminals
Visual check
Proper clearance
Correct
Loose connectors
Visual check
Connectors should
not be loose.
Retighten connector
mounting screws
Line voltage check
Measure voltage between
input terminals
3.3 Power
specifications
Change supply power