LSIS XGT Series - Encoder Input (DC5 V Voltage Output) Wiring Example

Chapter 3 Operation Order and Installation
3-19
3.3.7 Encoder Input (DC5V Voltage Output) Wiring Example
When pulseulse generator is a voltage output type, wiring example of motion controller and encoder input part is as
follows.
In case pulse generator is totem-pole output and used as voltage output style, wiring is equal.
A phase +
A phase -
B phase +
B phase -
OUTA
OUTB
5V DC
F.G 0V 5V
XMC-E32A
Twisted shielded cable
Note
Before Wiring, please consider maximum output distance of pulse generator.