Chapter 10 CPU Function
10.10 Monitoring Functions
It is the function to monitor the motion controller system’s general information.
(1) If you click 『Monitor』, the submenu will be displayed as below.
(2) The below table provides the descriptions on each item.
Items Descriptions Remarks
Start/End monitor Specifies the startup and end of the monitor.
Changes every time you
click
Suspend monitor Suspends the monitor.
Restart monitor Executes the suspended monitor again.
Monitor suspension
setting
It is the function to suspend the monitor when the set
device’s value is matched with the conditions.
Restarts when you click
‘Restart Monitor’
Changing the current
value
Changes the currently selected device’s current value.
System monitor Monitors the current system’s general information.
Device monitor It is the function to monitor each device.
Trend monitor Monitors the set device’s trend.
For more details, refer to
the XG5000 manual.
User event
Monitors the set device’s value when the event specified
by a user occurs.
Data trace Traces the set device’s value.
To Next Page
Loading...
