LSIS XGT Series - Function to Delete All of the Motion Controller

Chapter 10 CPU Function
10-40
10.11 Function to Delete All of the Motion Controller
The function to delete all of motion controller is the initialization function to delete all programs, parameters,
passwords, data stored in the motion controller.
(1) How to delete all of motion controller
(a) Click『Online』-『Reset/Clear』-『Clear PLC』.
(b) If you choose 『Yes』 in the dialog box, the window for selecting the connection method with the motion
controller to be deleted is created.
(c) If you select “Yes” in the confirmation window, the data value will be cleared to “0”. Since the parameter
may need a default value depending on the data, an error may occur after the erase operation. If an error
occurs, it is necessary to write the data as an initial value once.