Chapter 10 CPU Function
(d) Trend Monitor
It is the function to represent the set device value in a graphic form. The value represented on the graph
is not the data collected by the motion controller at the right timing but the value read from XG5000 through
the communication function. Accordingly, communication delay can occur so it may not be matched with the
actual data collected at the right cycle.
You are recommended to use the Trend Monitor function to check the rough data trend.
(e) Data trace
It is a function to collect device values set at the time of event set by the user or at a desired time and
monitor them with graph or data. Unlike trend monitor, it collects actual data at a sampling period set by the
user, and thus is used check actual data at a certain point in time.
1) Data Trace condition setting
2) Device setting
3) Data display
Note
For more details on the monitoring function, refer to XG5000 manual.
To Next Page
Loading...
